MadBull have launched their 6.01mm T6-7075 tight bore barrel:
Friends, Finally, we have sufficient stock of 6.01mm T6-7075 Tight Bore barrel.
It is so hard to make tight bore barrel out of T6 7075 Aircraft Alloy material and it took us so long to smoothen the production process!
- WORLD FIRST (maybe the only)7075 AIRCRAFT ALLOY AIRSOFT BARREL
- 6.01MM PRECISION TIGHTBORE
- HARD ANODIZED COATING
- TITANIUM COLOR FINISH
- ULTIMATE TENSILE STRENGTH & HARDNESS
What is T6 7075 Aircraft Alloy material?
From Wikipedia: Aluminium alloy 7075 is an aluminium alloy, with zinc as the primary alloying element. It is strong, with a strength comparable to many steels, and has good fatigue strength and average machinability, but has less resistance to corrosion than many other Al alloys. Its relatively high cost limits its use to applications where cheaper alloys are not suitable.
Why it’s hard to use T6 7075 to make Tightbore barrel?
T6 7075 Alloy material is so hard and it is almost impossible to pass through the small diameter Aluminum extrusion mold. The failure rate is extremely high and we have a lot of trouble in the early stage to have sufficient supply.
NOTE: The bore of this barrel is so tight around the BB that even the smallest obstruction in the barrel will cause a jam when fired. This barrel is recommended ONLY for advanced/experienced players that take the responsibility to clean their barrels regularly in order to avoid jams.